Many people say that when they buy Ties, they don't know which ones are of poor quality. Here, Xiaobian explains the general characteristics of fake and shoddy ties:
1. It will break when pulled. The typical feature of fake and shoddy ties is that they will break when pulled. The key is caused by poor materials or low production technology. Therefore, everyone can pull the tie belt to detect whether it is broken when buying.
2. The binding wire is easy to break. Although some ties are not easy to break when they are pulled, they will break immediately once they are tied. Even if they continue, the binding is too loose, resulting in failure to meet the expected goal of application.
3. There will even be a situation of how much is used and how much is broken. Therefore, we must pay attention to the quality of the tie when purchasing the tie.
application area
1. Household furniture wiring. We can use binding belts to carry out binding when wiring at home in daily life.
2. The water pipe is fixed, and the line and water pipe can be tied together with a tie.
3. Cable storage and arrangement, especially in some areas with many lines (disordered lines), polyester tie can be used for home storage.
4. Wall routing. For the lines on the wall, we can use special tools (plastic wall stickers) and fix them with ties.
5. Fixed binding: for some articles that must be fixed in work and daily life, ties can also be used to carry out rapid fixed binding. As one of the special tools for binding objects in daily life, what areas should we pay attention to in application.
1. The characteristics must be paid attention to. At present, in many areas, plastic ties are used in many fields, but different fields should properly select ties according to their own application natural environment and application requirements. For example, locking plastic ties have strong resistance to high temperature and ultra-low temperature, and can be used in extreme natural environment, However, loose ties are not easy to embrittle and are more suitable for industrial production.
2. Identification ties and beverage articles shall be prevented from using plastic ties. We should try to reduce the use of plastic ties to bind food or drinks. Once the ties are too tight, some compounds on the plastic are likely to enter the food materials.
3. Remove and replace immediately if problems are found. In the whole process of the application of plastic ties, if you find that the ties are loose and other problems, you should immediately remove and replace them. If you find that the bound objects move and the ties are loose, you must remove and replace a type. Also, if you find that the remaining length of the ties is too long after binding, you should also change a specification and model for application.
4. Application maintenance is very important. Only by carrying out excellent maintenance on the plastic tie can it give full play to its higher effect. If you expose the tie products to the sun for a long time, it will accelerate its embrittlement in areas such as rain, so that the plastic tie will become brittle and crack quickly after application. Therefore, when we apply it, Do a good job in the maintenance of the tie after application.
