Cable Tie With Mounting Hole

Structural details
Mounting hole position: Most products have round or square holes in the head lock area, with a hole diameter of 4.8-7.0mm, suitable for M3-M6 screws. Some models (such as blind hole design) do not need to penetrate the surface, suitable for scenes where drilling is not possible.
Tooth belt and lock buckle: It adopts a self-locking structure, and the tooth belt surface has fine anti-slip teeth. The tensile strength ranges from 18 pounds (light) to 120 pounds (heavy), and the specifications can be selected according to the load.
Humanized design: The curved tip is easy to insert the cable and reduce the difficulty of operation; some models have a flat head to reduce protrusions to avoid scratches.

Material and performance
Main material: UL-certified nylon 66 (PA66) is used, which has the characteristics of acid and alkali resistance, corrosion resistance, and strong insulation. Black models usually add UV stabilizers and are suitable for outdoor or long-term sunlight environments.
Flame retardant grade: Most products meet UL 94 V-2 standards and are self-extinguishing when exposed to fire, suitable for high safety requirements such as electrical equipment.
Temperature range: The standard model has an operating temperature of - 40°F to 185°F (-40°C to 85°C), and the high-temperature model can reach 230°F (110°C), meeting the needs of industrial high-temperature environments.

 Technical Parameters and Specifications

Length and Width: Lengths range from 4 inches to 14 inches (100mm-350mm) and widths range from 2.5mm-7.2mm, which can accommodate cable bundles of different diameters. For example, the 7.2mm wide model can bundle wire bundles with a diameter of up to 90mm.
Mounting Hole Size: Commonly #10 or 1/4 inch (about 6.35mm), some brands support customized hole diameters to match special screws.
Tensile Strength: Lightweight (18-40 pounds) is suitable for data cables or small wire harnesses, and heavyweight (50-120 pounds) is used for power cables or vibration environments. For example, the 120-pound model can fix the wiring harness in the engine compartment of a car.

What is the core difference between nylon cable ties with mounting holes and ordinary nylon cable ties? ​

The core difference lies in the integrated design of "mounting hole + bundling". Ordinary cable ties can only bundle cables. If they need to be fixed, they need to be equipped with additional accessories such as brackets and self-adhesive bases; while models with mounting holes can directly fix the bundled cable bundles on the surface with screws, eliminating the secondary installation steps. They are especially suitable for vibration environments or small spaces, and the stability is improved by more than 40%. In addition, the location design of the mounting holes (such as the head lock area) ensures that the locking strength of the cable tie is not affected when fixed. ​

What are the irreplaceable advantages of nylon 66 as the main body?​

Nylon 66 (PA66) is the core material of this product, and its advantages are: ① Excellent mechanical properties, tensile strength can reach 120 pounds, far exceeding ordinary plastics (such as PE); ② Strong weather resistance, a wide temperature range of -40℃ to 85℃, suitable for most industrial environments; ③ Outstanding insulation, volume resistivity of more than 10¹⁴Ω・cm, suitable for electrical equipment scenarios; ④ After adding UV stabilizers, it can resist UV aging, and with acid and alkali resistance, the outdoor service life is extended to more than 5 years, which is a lightweight alternative to metal cable ties. ​

Which specification of products should be preferred when used in outdoor scenes? ​

For outdoor use, weather resistance and anti-aging capabilities should be focused on, and it is recommended to give priority to black UV-stabilized models. This type of product adds ultraviolet absorbers such as carbon black to resist material embrittlement caused by long-term sunlight, and the operating temperature range is maintained at -40℃ to 85℃. At the same time, it is necessary to select a model with an aperture that is suitable for outdoor screws (such as stainless steel) to avoid failure of the mounting hole due to rust. If used in high humidity environments (such as coastal areas), it is also necessary to confirm that the product meets the salt spray test standards (such as ASTM B117 48 hours without corrosion).

Hot Tags: cable tie with mounting hole, China, suppliers, manufacturers, factory, custom, wholesale, 350mm cable ties, cable nylon tie, cable ties 250mm, heavy duty plastic cable ties, plastic cable zip, zip ties with holes