Although the tie is small in size, it has a lot of uses. Often used in daily life. For example, the sorting of computer cables, the tightening of bag buttons, and the binding of ropes can all be done with cable ties. However, don't underestimate this cable tie, it is very important to fasten and disassemble it, especially when it is disassembled, most people will not take it apart and cut it directly with scissors, then the cable tie will be useless and cannot be reused.
1. Cable ties are easy to buy in the market, and they are relatively cheap. The general material is plastic. Its style is shown in Fig. First observe, one end is pointed, the other end is pierced, and the other side has a serrated pattern.
2. When tying, first distinguish the pros and cons. Bend the jagged side inwards, as shown. The pointed end goes through the serial port to form a circle.
3. At this time, you can wrap the things you need to organize. Just pull the pointed end with your hand to tighten it without loosening.
4. It is easier to tie, but more difficult to open. Most people don't know how to solve it, and most of them cut directly with scissors. This is what you need to prepare a small flat-blade screwdriver.
5. Carefully observe the serial port, and you will find that there is a small anti-loose stop, which is stuck with the cable tie. This is why the tie will not come loose. We just need to use a small screwdriver to press between the stop in the serial port and the cable tie, as shown in the figure. The tie can be easily pulled out and uncovered. The cable ties can be reused again.
Precautions
1. Do not reverse the direction of the tie when tying it, and pay attention to the zigzag road surface, otherwise it will not be able to be locked.
2. The flat mouth of the flat-blade screwdriver should be small, otherwise it will not penetrate the hole.
