Plastic ties are made of engineering plastics by injection molding, so plastic ties have strong tensile strength.
There is a growing demand for plastic ties. Plastic ties have great advantages. It can be used well in any environment. Strong adaptability. The plastic tie has passed UL testing and certification, and will not be damaged in some high-temperature environment. There are stains on the plastic tie, which should effectively solve the problem. The pressure and angle of the equipment producing plastic ties must be adjusted accordingly. Otherwise, the life of the plastic tie produced will not be very long. Many plastic tie manufacturers do not have good control over their printing, which will produce scum and stains. What are the reasons and solutions? When printing plastic ties, the scraper moves randomly, so it does not change the position where the plastic ties are placed. You can see that the plastic tie is caused by ink in the dye. The problem that caused the print cable tie to fail. In fact, it is relatively easy to solve this problem. Just use a screen to filter the nylon tie dye ink. After filtration, check whether the scraper is damaged. You can still print plastic ties as long as the scraper is intact.
Sometimes, the size of the tie produced during printing is slightly different. In severe cases, it must be shut down for maintenance before it can be used again. As a kind of binding article, binding has entered our daily life. We think everyone has a certain understanding of nylon binding products, but we believe that colleagues who use binding will accidentally touch the lock when using cables. A accidentally locked tie needs help. This is the correct way to accidentally untie the cable tie. Here is the correct way to untie the tie accidentally. You only need one tool—— It can be "sharp and hard objects", the tip of scissors, earplugs, etc. Carefully observe the cable ties. There is a small "tongue" plastic sheet on the tie head of the product itself. The function of the tie is to let the tie pass and jam, so that it can only move forward and not retract. Press the object under the sharp "tongue", then lift the net with a small force, and then quickly pull out the tie. Don't make this mistake again when you accidentally lock your tie.
1, the network Xiaobian first saw this method, make complaints about it, who gave me this method? If you cut it, the tie itself will break. Those who want to do it first refuse this method, because they may want to use it after loosening the tie.
2. If you pull hard, this method is the most recommended by netizens, but if you pull hard, the best way to loosen is to understand the performance of network small braided ties. Pulling hard will leave a red mark on your hand. It is impossible to untie the tie by pulling hard.
3. Other kinds of good methods, such as gritting teeth, burning, etc. These methods are very serious. I warn you not to try. Improper fastening of cable ties is a small thing, but this strange use method will bring more problems.
